Zo heb ik het ook altijd gedaan, en ik kan nu dus gaan bekijken of je dan een beetje goed uitkomt. Zeker op LPG wil je niet dat hij te arm loopt.dosering: gastoevoer flink open draaien, motor op 2300 toeren zetten en dan gastoevoer langzaam knijpen tot toeren afnemen, dan ong. kwart slag terug, klaar.
Het klopt trouwens dat een motor op een lambdawaarde van 1 niet het maximale vermogen heeft. Het is een theoretische waarde. In de praktijk moet de motor altijd iets rijker worden afgesteld:
Code: Selecteer alles
Lambda
Most practical AFR devices actually measure the amount of residual oxygen (for lean mixes) or unburnt hydrocarbons (for rich mixtures) in the exhaust gas. Lambda (λ) is the ratio of actual AFR to stoichiometry for a given mixture. Lambda of 1.0 is at stoichiometry, rich mixtures are less than 1.0, and lean mixtures are greater than 1.0.
Code: Selecteer alles
AFR
The Air fuel ratio is the most common reference term used for mixtures in internal combustion engines.
It is the ratio between the mass of air and the mass of fuel in the fuel-air mix at any given moment.
For pure octane the stoichiometric mixture is approximately 14.7:1 or λ of 1.00 exactly.
In naturally aspirated engines powered by octane, maximum power is frequently reached at AFRs ranging from 12.5 - 13.3:1 or λ of 0.850 - 0.901.